Diameter 500mm Hollow Core Insulators Working Temperature 0℃~400℃

Diameter 500mm Hollow Core Insulators Working Temperature 0℃~400℃

Specifications:

1) the bushing use high aluminum porcelain C130 , the Max. insulator ID we can produce is 500mm , at the same time , we must guarantee the insulator profile section is a circle , the roundess must be in torcelance.

2) The hollow insulator specially used for dust percipitators as a insulation parts, insulator will working in a souranding temperature  up to 400℃ . which common porcelain can't withstand. So when we make insulator component design , the Al2O3 percentage must be above 60% .

In this way , insulator firing temperature must be over 1300℃ ,the related production cost will increase much also .

3) the applicable standard is IEC standard .

Applications:

specially used for dust percipitators ​as a mechanical support parts and insulation parts also .

Competitive Advantage:

All insulators to are well tested before shipment . the tests items are:

1) routine visual inspection , routine water pressure test and electrical flashover test

2) sample test , for example dimensional check , porosity test etc. mechanical bending load test , water burst test etc. on every lot of bushings.

only the test results are positve, we can start insulator cleaning and packing ,and following shipments.

we offer 2 years quality guarantee after shipment .